Luvocom-News

LUVOCOM® EOG – New Generation of PEEK Compounds for Applications in the Energy Industry

Lehmann&Voss&Co. announces the introduction of LUVOCOM® EOG, a new generation of PEEK compounds specifically formulated for the energy industry. Developed to meet the need for higher performance and lower risk in material selection, these new compounds offer unlimited life expectancy at 240°C (464°F) in downhole environmental conditions per NORSOK M-710 Standard.

Applications in the energy industry require materials with outstanding performance. These new compounds help OEMs and processors address both new and existing application challenges. OEMs need better long-term performance such as temperature resistance and higher extrusion resistance, as well as more reliable mechanical properties. Processors have issues with manufacturing due to non-isotropic properties and non-optimized processing behavior.

The LUVOCOM EOG family of compounds is targeted to provide true improvements that will directly elevate component performance. When compared to traditional PEEK compounds in energy applications, LUVOCOM EOG materials offer easier processing, shorter annealing time (up to 50% less) and reduced wear. Additional benefits include reduced internal stress and warpage (up to 150% better shrinkage ratio). With nearly isotropic properties, the new compounds drastically reduce dependence on molding flow direction of mechanical properties.  And, the material’s high creep resistance means better extrusion resistance, which leads to more resistant and reliable seals.

Applications include bearings, bushings, thrust washers and gears, seals, back-up rings, packers and plugs, and compressor components. Each LUVOCOM EOG grade is focused on specific applications and is also a formulation platform for future customization.

LUVOCOM EOG materials have achieved NORSOK M-710 compliance for use in oil and gas applications. The standard specifically defines requirements for critical non-metallic (polymer) sealing, seat and back-up materials for permanent sub-sea applications. Lehmann&Voss&Co. enlisted Alpine PolyTech in Fort Worth, Texas to conduct the stringent NORSOK tests.  Four LUVOCOM EOG materials were tested at temperatures of 215°C (419°F), 225°C (437°F), and 240°C (464°F). After 42 days, the trends of all compounds remained above the acceptance criteria, and there was no progressive degradation of tensile properties due to the thermally accelerated chemical reaction between the EOG materials and H2S.  Alpine certified all four grades as qualified.

Future plans for Lehmann&Voss&Co. proprietary EOG technology include creating a material that is an optimized glass fiber reinforced PEEK with better resistance to hot water.

LUVOCOM EOG materials for applications in the energy market including bearings, bushings, thrust washers and gears, seals, back-up rings, packers and plugs, and compressor components

 

Contact person:

Lehmann&Voss&Co. KG
Thomas Collet
Schimmelmannstrasse 103
22043 Hamburg
Germany
Tel.: +49 40 44197 412
E-mail: col(at)lehvoss.de